FyndStock Tools · free, no account needed

ATR Stop Loss Calculator

Where should your stop go? Enter price, ATR(14) and a multiplier — the volatility-based stop level and its distance in percent appear instantly.

Stop loss level

48.20

Distance from price

3.6%

1.80 absolute (1.5 × ATR)

What does this calculator do?

It calculates a stop loss level based on the Average True Range, a stock's average daily range. The formula: stop = price minus multiplier times ATR. Instead of an arbitrary percentage, the stop gets a distance that matches how the stock actually moves. A quiet stock gets a tight stop, a volatile one a wide stop — both with the same logic: outside the normal noise, but close enough to keep losses small.

Why volatility-based stops?

The most common stop mistake isn't a missing stop, it's one that's too tight. Put a 3% stop on a stock that swings 4% a day and the normal back-and-forth will knock you out — then you watch the stock rise without you. The ATR fixes this at the root because it measures the swings before you set the stop. A stop at 1.5 × ATR sits outside what the stock covers on an ordinary day. If it gets hit anyway, the move wasn't noise but a real signal against the setup.

Successful momentum traders combine two views here: the technical level (below the last consolidation, as Mark Minervini teaches, or at the 10/20-day line like Oliver Kell) and the ATR distance as a sanity check. If the two are close, the stop is well placed. If they're far apart, the setup is often just too choppy for a clean entry.

A worked example

A stock trades at $50.00 and its ATR(14) is $1.20. With a multiplier of 1.5 the stop distance is $1.80 — the stop sits at $48.20, or 3.6% below the price. Compare the same math on a volatile name: price $451, ATR $32.60, factor 2 — stop at $385.80, a 14.5% distance. Both stops follow the same rule, but the second one forces a much smaller position: at 1% account risk, the first position could be about 28% of the account, the second only about 7%.

How to read the result

The percentage distance is the more important of the two numbers. Up to about 5% is a typical swing trading stop, the kind large caps allow in calm periods. Between 5% and 10% you're dealing with a volatile stock or a deliberately wide trend stop — legitimate, but your position size has to shrink accordingly. Above 10%, ask whether the timing is right: the same stock is often tradable with half the stop distance after it calms down. The stop level is always a starting point, not a sacred number — if there's clear support just below it, the stop belongs below that support.

FyndStock does this math for you

In the screener, members get the ATR-based stop calculated for every setup — together with entry, target and position size. The daily scan shows every currently confirmed setup.

ATR stop loss FAQ

What is the ATR (Average True Range)?+

The ATR measures the average daily range of a stock over recent periods — usually 14 trading days, hence ATR(14). A $50 stock with an ATR of $1.20 moves a little over a dollar on a normal day. Every common charting platform has the ATR as a standard indicator.

Which ATR multiplier should I use for a stop loss?+

Typical values are 1.5 to 3. A factor of 1.5 puts the stop outside the normal daily range and suits short swing trading holds. A factor of 2 to 3 gives the trade more room and suits longer trends — but costs more when the stop is hit and forces a smaller position.

Where do I find a stock's ATR?+

In any charting software under the standard indicators (ATR, period 14). FyndStock also shows the ATR(14) for free on every stock page — for example /stock/AAPL — together with trend and momentum metrics.

Is an ATR stop better than a fixed percentage stop?+

It adapts, and that's the key difference. A fixed 5% stop is needlessly wide on a sleepy stock and so tight on a volatile one that normal daily noise triggers it. An ATR stop scales with how much the stock actually moves — same logic, a fair distance for every stock.

Should I trail my ATR stop?+

Many traders do exactly that: as the price rises, the stop is recalculated from the current price and only ever moved up, never down. That locks in gains without choking the trend. What matters is a fixed routine — say, daily after the close — instead of nervous intraday adjustments.

Does a stop loss guarantee the calculated exit price?+

No. A stop order becomes a market order once the level is hit and can fill much worse on a gap — after overnight earnings, for example. That is why every stop needs a position size that keeps even a gap loss survivable.

Keep reading

This tool is for educational and informational purposes only and is not investment advice or a recommendation to buy or sell. All calculations are provided without warranty. Stop orders do not guarantee an execution price. Trading securities involves substantial risk, including the loss of your entire investment.